CentOS Stream 9

Section 1

System Prep

Before installing any service, update the package repositories and install the tools the mo-installer and moctl depend on. CentOS Stream 9 is the rolling-release preview of RHEL 9. Commands match the RHEL 9 path. CentOS Stream is not listed in Oracle, Microsoft, or RabbitMQ supported matrices, so most cells are partial.

1.1 Update the system

sudo dnf update -y
sudo reboot

1.2 Enable the EPEL repository

Rocky Linux ships epel-release in its standard repositories.

sudo dnf install -y epel-release
sudo dnf update -y

1.3 Enable the CodeReady Linux Builder (CRB)

sudo dnf config-manager --set-enabled crb

1.4 Install required utilities

sudo dnf install -y unzip wget curl jq net-tools vim bash-completion tar lsof telnet firewalld

1.5 Configure the firewall

sudo systemctl enable --now firewalld

sudo firewall-cmd --permanent --add-port=8080/tcp
sudo firewall-cmd --permanent --add-port=8070/tcp
sudo firewall-cmd --permanent --add-port=8071/tcp
sudo firewall-cmd --permanent --add-port=8072/tcp
sudo firewall-cmd --permanent --add-port=6379/tcp
sudo firewall-cmd --permanent --add-port=5672/tcp
sudo firewall-cmd --permanent --add-port=15672/tcp

sudo firewall-cmd --reload

1.6 Set SELinux to permissive

sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config

Section 2

Database

PostgreSQL 16 is the default backend for miniOrange IDP 5.0.0. The installer ships the PostgreSQL JDBC driver, so no manual driver placement is needed.

2.1 Add the PGDG repository

sudo dnf install -y https://download.postgresql.org/pub/repos/yum/reporpms/EL-9-x86_64/pgdg-redhat-repo-latest.noarch.rpm

2.2 Disable the built-in PostgreSQL module

RHEL 9 ships an older PostgreSQL via its AppStream module; disabling it avoids a version conflict with PGDG.

sudo dnf -qy module disable postgresql

2.3 Install PostgreSQL 16

sudo dnf install -y postgresql16-server postgresql16 postgresql16-contrib

2.4 Initialise and start the service

sudo /usr/pgsql-16/bin/postgresql-16-setup initdb
sudo systemctl enable --now postgresql-16
sudo systemctl status postgresql-16

2.5 Create the miniOrange database and user

sudo -u postgres psql <<'SQL'
CREATE USER moadmin WITH PASSWORD 'Password123';
CREATE DATABASE miniorangedb OWNER moadmin;
ALTER USER moadmin WITH SUPERUSER;
SQL

Why SUPERUSER. The IDP initialisation wizard runs schema creation and migrations on first startup. SUPERUSER avoids permission errors during this step. You can downgrade the role to a constrained owner after initialisation if your policy requires it.

2.6 Switch authentication to md5

PostgreSQL on RHEL defaults to ident for local TCP connections; the IDP authenticates with username and password over TCP, so switch to md5.

sudo sed -i \
  -E 's/^(host\s+all\s+all\s+(127\.0\.0\.1\/32|::1\/128)\s+)ident/\1md5/' \
  /var/lib/pgsql/16/data/pg_hba.conf

sudo systemctl restart postgresql-16

If you want the IDP to connect from a different host, also append a row like host all moadmin 10.0.0.0/8 md5 and reload.

2.7 Open the PostgreSQL port (only if remote access is needed)

sudo firewall-cmd --permanent --add-port=5432/tcp
sudo firewall-cmd --reload

2.8 Verify

PGPASSWORD=Password123 psql -h 127.0.0.1 -U moadmin -d miniorangedb -c '\l'

miniorangedb should appear in the output.

Values for the `/initialize` wizard

Keep these handy; you’ll enter them in Section 5 after the installer finishes.

Field	Value
Database Type	PostgreSQL
Host	`127.0.0.1`
Port	`5432`
Database name	`miniorangedb`
Username	`moadmin`
Password	`Password123`

⚠ Derived, needs review. These steps are derived from the MySQL vendor's official install docs combined with the miniOrange PostgreSQL and Oracle source flow. They should work, but each command should be sanity-checked on this exact OS before production use.

MySQL 8.4 LTS as the IDP backend. These steps are derived from the MySQL community repo install path combined with the JDBC driver placement convention from the Oracle source flow; review before production use.

2.1 Disable the built-in MySQL module

sudo dnf -qy module disable mysql

2.2 Add the MySQL community repository

sudo dnf install -y https://dev.mysql.com/get/mysql84-community-release-el9-1.noarch.rpm
sudo dnf clean all && sudo dnf makecache

2.3 Install MySQL 8.4

sudo dnf install -y mysql-community-server mysql-community-client
sudo systemctl enable --now mysqld

2.4 Retrieve the temporary root password

MySQL 8.x generates a one-time root password on first start.

sudo grep 'temporary password' /var/log/mysqld.log

2.5 Secure the installation

sudo mysql_secure_installation

Set a permanent root password when prompted. Answer yes to removing anonymous users, disallowing remote root login, removing the test database, and reloading privileges.

2.6 Create the miniOrange database and user

mysql -u root -p <<'SQL'
CREATE DATABASE miniorangedb CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
CREATE USER 'moadmin'@'localhost' IDENTIFIED BY 'Password123';
CREATE USER 'moadmin'@'%'         IDENTIFIED BY 'Password123';
GRANT ALL PRIVILEGES ON miniorangedb.* TO 'moadmin'@'localhost';
GRANT ALL PRIVILEGES ON miniorangedb.* TO 'moadmin'@'%';
FLUSH PRIVILEGES;
SQL

Note. MySQL 8.4 defaults the authentication plugin to caching_sha2_password. The mysql-connector-j 8.x driver supports this; older drivers do not.

2.7 Place the MySQL JDBC driver (derived assumption)

The miniOrange v5.0.0 source documentation requires manual driver placement only for Oracle. By analogy with that flow, MySQL on a non-Postgres deployment likely needs mysql-connector-j placed in the same directory. Confirm with miniOrange support before relying on this step.

sudo mkdir -p /opt/miniorange/drivers
cd /tmp
sudo wget https://dev.mysql.com/get/Downloads/Connector-J/mysql-connector-j-8.4.0-1.el9.noarch.rpm
sudo dnf install -y ./mysql-connector-j-8.4.0-1.el9.noarch.rpm
sudo cp /usr/share/java/mysql-connector-j-8.4.0.jar /opt/miniorange/drivers/
sudo chmod 644 /opt/miniorange/drivers/mysql-connector-j-8.4.0.jar

2.8 Open the MySQL port (only if remote access is needed)

sudo firewall-cmd --permanent --add-port=3306/tcp
sudo firewall-cmd --reload

2.9 Verify

mysql -u moadmin -pPassword123 -h 127.0.0.1 -e 'SHOW DATABASES;'

miniorangedb should appear in the output.

Values for the `/initialize` wizard

Field	Value
Database Type	MySQL
Host	`127.0.0.1`
Port	`3306`
Database name	`miniorangedb`
Username	`moadmin`
Password	`Password123`

◐ Partial support. CentOS Stream is a rolling preview of RHEL; not officially listed by Microsoft

Microsoft SQL Server 2022 on Rocky Linux 9. Microsoft does not officially list Rocky Linux in its supported matrix, but Rocky is binary-compatible with RHEL 9 and the RHEL 9 packages install and run cleanly in practice. Treat this combination as partial support, not production-blessed.

2.1 Verify system requirements

free -h

2.2 Add the Microsoft repository (using the RHEL 9 repo)

sudo curl -o /etc/yum.repos.d/mssql-server.repo \
  https://packages.microsoft.com/config/rhel/9/mssql-server-2022.repo
sudo curl -o /etc/yum.repos.d/msprod.repo \
  https://packages.microsoft.com/config/rhel/9/prod.repo

2.3 Install MSSQL 2022 and tools

sudo dnf install -y mssql-server
sudo ACCEPT_EULA=Y dnf install -y mssql-tools18 unixODBC-devel

2.4 Run the initial setup

sudo /opt/mssql/bin/mssql-conf setup
sudo systemctl enable --now mssql-server

2.5 Add tools to PATH

echo 'export PATH="$PATH:/opt/mssql-tools18/bin"' | sudo tee /etc/profile.d/mssql.sh
source /etc/profile.d/mssql.sh

sqlcmd -S localhost -U SA -P '<SA_PASSWORD>' -C -Q "
CREATE DATABASE miniorangedb;
GO
CREATE LOGIN moadmin WITH PASSWORD = 'Password123!';
GO
USE miniorangedb;
CREATE USER moadmin FOR LOGIN moadmin;
ALTER ROLE db_owner ADD MEMBER moadmin;
GO
"

2.7 Place the MSSQL JDBC driver (derived assumption)

sudo mkdir -p /opt/miniorange/drivers
cd /tmp
sudo curl -L -o mssql-jdbc.tar.gz \
  https://download.microsoft.com/download/8/c/d/8cdfd87a-1684-4731-91a9-2ba182c8b0ad/sqljdbc_12.6.4.0_enu.tar.gz
sudo tar -xzf mssql-jdbc.tar.gz
sudo cp sqljdbc_12.6/enu/jars/mssql-jdbc-12.6.4.jre11.jar /opt/miniorange/drivers/

2.8 Open the MSSQL port

sudo firewall-cmd --permanent --add-port=1433/tcp
sudo firewall-cmd --reload

Values for the `/initialize` wizard

Field	Value
Database Type	MSSQL
Host	`127.0.0.1`
Port	`1433`
Database name	`miniorangedb`
Username	`moadmin`
Password	`Password123!`

◐ Partial support. Officially supported on RHEL/OL only; works in practice on Stream

Oracle Database 19c on RHEL 9. The flow mirrors the source Oracle Linux 8 + Oracle 19c deployment guide, with one wrinkle: RHEL 9 isn’t on the Oracle 19c preinstall RPM matrix the way Oracle Linux 8 is, so the preinstall step uses the OL8 RPM with --nogpgcheck and --skip-broken.

2.1 Install the Oracle Database preinstall package

sudo dnf install -y \
  https://yum.oracle.com/repo/OracleLinux/OL8/appstream/x86_64/getPackage/oracle-database-preinstall-19c-1.0-1.el8.x86_64.rpm \
  --nogpgcheck --skip-broken

This creates the oracle user, sets kernel parameters, and configures shell limits. On RHEL 9, this is the closest viable path to the OL8 reference flow.

2.2 Install Oracle 19c

Download oracle-database-ee-19c-1.0-1.x86_64.rpm from Oracle’s site (login required) to the server, then:

cd /opt
sudo dnf localinstall -y oracle-database-ee-19c-1.0-1.x86_64.rpm

2.3 Create the database

sudo /etc/init.d/oracledb_ORCLCDB-19c configure

This creates the structure:

Item	Value
CDB	ORCLCDB
PDB	ORCLPDB1
Listener	1521

2.4 Configure Oracle environment variables

sudo -i -u oracle bash <<'BASH'
cat >> ~/.bash_profile <<'PROFILE'
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/19.0.0/dbhome_1
export ORACLE_SID=ORCLCDB
export PATH=$ORACLE_HOME/bin:$PATH
PROFILE
source ~/.bash_profile
echo $ORACLE_HOME
BASH

2.5 Open the PDB and save state

sudo -i -u oracle bash -c "sqlplus -S / as sysdba" <<'SQL'
STARTUP;
ALTER PLUGGABLE DATABASE ALL OPEN;
ALTER PLUGGABLE DATABASE ALL SAVE STATE;
SHOW PDBS;
SQL

ORCLPDB1 should be in READ WRITE state.

2.6 Start and verify the listener

sudo -i -u oracle bash -c "lsnrctl start || lsnrctl status"
sudo ss -tulnp | grep 1521

2.7 Create the miniOrange Oracle user

sudo -i -u oracle bash -c "sqlplus -S / as sysdba" <<'SQL'
ALTER SESSION SET CONTAINER=ORCLPDB1;
CREATE USER moadmin IDENTIFIED BY Password123;
GRANT CONNECT, RESOURCE TO moadmin;
GRANT DBA TO moadmin;
SQL

Verify connectivity over the service name:

sudo -i -u oracle bash -c "sqlplus moadmin/Password123@//127.0.0.1:1521/ORCLPDB1 <<< 'SELECT 1 FROM dual;'"

2.8 Place the Oracle JDBC driver

This step is required: Oracle’s JDBC driver isn’t bundled in mo-installer because of Oracle’s licensing.

sudo mkdir -p /opt/miniorange/drivers
sudo find /u01/app/oracle -name 'ojdbc8.jar' -print 2>/dev/null | head -1
sudo cp /u01/app/oracle/product/19.0.0/dbhome_1/jdbc/lib/ojdbc8.jar \
        /opt/miniorange/drivers/
sudo chmod 644 /opt/miniorange/drivers/ojdbc8.jar

2.9 Open the Oracle port

sudo firewall-cmd --permanent --add-port=1521/tcp
sudo firewall-cmd --reload

Values for the `/initialize` wizard

Important. Use Service Name, not SID. The IDP schema lives in the PDB (ORCLPDB1), not the CDB (ORCLCDB).

Field	Value
Database Type	Oracle
Host	`127.0.0.1`
Port	`1521`
SID / Service	Service
Service Name	`ORCLPDB1`
Username	`moadmin`
Password	`Password123`

Section 3

Erlang + RabbitMQ

RabbitMQ is used by the IDP for internal messaging between microservices. It requires Erlang. Both are installed directly from the official RabbitMQ RPM releases on GitHub.

3.1 Install Erlang 26

sudo dnf install -y \
  https://github.com/rabbitmq/erlang-rpm/releases/download/v26.2.5.2/erlang-26.2.5.2-1.el8.x86_64.rpm \
  --nogpgcheck

Note. The published Erlang RPM is built for el8, but installs cleanly on RHEL 9 because of compatible runtime dependencies. There is no current el9-tagged build from upstream.

3.2 Install RabbitMQ 3.13.7

sudo dnf install -y \
  https://github.com/rabbitmq/rabbitmq-server/releases/download/v3.13.7/rabbitmq-server-3.13.7-1.el8.noarch.rpm \
  --nogpgcheck

3.3 Enable and start the service

sudo systemctl enable --now rabbitmq-server
sudo systemctl status rabbitmq-server

3.4 Enable the management plugin

sudo rabbitmq-plugins enable rabbitmq_management
sudo systemctl restart rabbitmq-server

3.5 Verify

sudo rabbitmqctl status
sudo ss -tulnp | grep 5672

You should see a listener on :5672 (AMQP) and :15672 (management UI).

Values for the `/initialize` wizard

Field	Value
RabbitMQ Host	`127.0.0.1`
AMQP Port	`5672`
Mgmt UI Port	`15672`
Default Login	`guest` / `guest`

Section 4

mo-installer

The miniOrange installer bundles Java 17 and Redis. You don’t install either manually. The installer auto-detects the OS and deploys the IDP services into /opt/tomcat/.

4.1 Download the installer

cd /opt
sudo wget https://miniorange.s3.us-east-1.amazonaws.com/public/installers/mo-installer-5.0.0.zip
sudo unzip mo-installer-5.0.0.zip -d mo-installer-5.0.0
cd /opt/mo-installer-5.0.0
ls -la

You should see:

.env.sh          Environment configuration (review before sourcing)
mo-installer.sh  Main installer script
moctl/           moctl CLI and bash completion

4.2 Review and source the environment file

less .env.sh
source .env.sh

Note. In v5.0.0, .env.sh does not contain database connection details. The DB connection is configured later through the browser UI at /initialize. Source the file as-is.

4.3 Set execute permissions

sudo chmod +x mo-installer.sh moctl/*.sh

4.4 Run the installer

sudo bash mo-installer.sh

Watch the output for failures. The installer covers:

Java 17 — installed automatically
Redis — installed and configured automatically
moctl — installed to /usr/bin/moctl with tab completion
IDP services — deployed to /opt/tomcat/

At the end of the run, the installer will print:

Next step: moctl service start

4.5 Start the four core services

moctl service start

The core services start in this order:

Service	Port	Purpose
configserver	8071	Configuration
eurekaserver	8070	Service registry
gatekeeper	8072	API gateway
miniorange	8080	Main IDP service

4.6 Check service status

moctl service status

Only the four core services should be active at this point. Secondary services start after initialisation.

Symbol	Meaning
`● running`	Active and registered in Eureka
`△ registering`	Active but not yet registered; wait and recheck
`△ stopped`	Inactive
`✗ failed`	Failed; check `moctl log <service>`

4.7 Open `/initialize` in a browser

https://<SERVER_IP>/initialize

You will see a self-signed certificate warning. Proceed past it.

Enter the values from the Database section above, plus the Redis and RabbitMQ values from Section 3 (Redis: 127.0.0.1:6379, no password by default).

After the wizard completes, the dashboard loads. Navigate to Settings → Base URL and set it to your final domain:

https://<your-domain>

4.8 Restart all services

This step starts the secondary services that depend on the completed schema.

moctl service restart

Wait 1–2 minutes for everything to register, then verify in the next section.

Section 5

Verify & Service Enablement

Confirm everything is running and registered. All commands here come from the source v5.0.0 guide.

5.1 Full service status

moctl service status

Every service should show ● running or ● reachable. If anything shows △ registering, wait 30 seconds and re-run.

5.2 Full diagnostics

moctl diagnose

Expected output includes:

Database connectivity reachable
Redis reachable
RabbitMQ reachable

5.3 Individual service status

systemctl status mo-idp-miniorange.service
systemctl status redis
systemctl status rabbitmq-server

5.4 Check all bound ports

sudo ss -tulnp | egrep '8080|8070|8071|8072|6379|5672'

For your DB:

DB	Port
PostgreSQL	5432
MySQL	3306
MSSQL	1433
Oracle	1521

5.5 Preflight

moctl pre checks Java, the DB, Redis, and RabbitMQ reachability in one go.

moctl pre

Quick `moctl` reference

Command	Purpose
`moctl service start`	Start all services in order
`moctl service stop`	Stop all services in reverse order
`moctl service restart`	Full ordered restart
`moctl service restart miniorange`	Restart one named service
`moctl log <service> -f`	Live tail logs
`moctl log <service> --since 1h`	Logs from the past hour
`moctl system memory`	Per-service RSS memory
`moctl jvm <service>`	Heap, threads, open file descriptors
`moctl diagnose ports`	Check that core ports are bound

Common issues

Issue: △ registering after a minute.

The service started but hasn’t completed its handshake with Eureka. Check the gatekeeper log:

moctl log gatekeeper --since 5min

Issue: PostgreSQL peer authentication failed.

You modified pg_hba.conf but didn’t restart. Run sudo systemctl restart postgresql-16.

Issue: SELinux denials in audit.log.

You skipped section 1.5. Set setenforce 0 and re-check getenforce.

Issue: Tomcat stale PID after a crash.

sudo rm -f /opt/tomcat/latest/temp/*.pid
moctl service restart miniorange

System Prep

1.1 Update the system

1.2 Enable the EPEL repository

1.3 Enable the CodeReady Linux Builder (CRB)

1.4 Install required utilities

1.5 Configure the firewall

1.6 Set SELinux to permissive

Database

2.1 Add the PGDG repository

2.2 Disable the built-in PostgreSQL module

2.3 Install PostgreSQL 16

2.4 Initialise and start the service

2.5 Create the miniOrange database and user

2.6 Switch authentication to md5

2.7 Open the PostgreSQL port (only if remote access is needed)

2.8 Verify

Values for the /initialize wizard

2.1 Disable the built-in MySQL module

2.2 Add the MySQL community repository

2.3 Install MySQL 8.4

2.4 Retrieve the temporary root password

2.5 Secure the installation

2.6 Create the miniOrange database and user

2.7 Place the MySQL JDBC driver (derived assumption)

2.8 Open the MySQL port (only if remote access is needed)

2.9 Verify

Values for the /initialize wizard

2.1 Verify system requirements

2.2 Add the Microsoft repository (using the RHEL 9 repo)

2.3 Install MSSQL 2022 and tools

2.4 Run the initial setup

2.5 Add tools to PATH

2.6 Create the miniOrange database and login

2.7 Place the MSSQL JDBC driver (derived assumption)

2.8 Open the MSSQL port

Values for the /initialize wizard

2.1 Install the Oracle Database preinstall package

2.2 Install Oracle 19c

2.3 Create the database

2.4 Configure Oracle environment variables

2.5 Open the PDB and save state

2.6 Start and verify the listener

2.7 Create the miniOrange Oracle user

2.8 Place the Oracle JDBC driver

2.9 Open the Oracle port

Values for the /initialize wizard

Erlang + RabbitMQ

3.1 Install Erlang 26

3.2 Install RabbitMQ 3.13.7

3.3 Enable and start the service

3.4 Enable the management plugin

3.5 Verify

Values for the /initialize wizard

mo-installer

4.1 Download the installer

4.2 Review and source the environment file

4.3 Set execute permissions

4.4 Run the installer

4.5 Start the four core services

4.6 Check service status

4.7 Open /initialize in a browser

4.8 Restart all services

Verify & Service Enablement

5.1 Full service status

5.2 Full diagnostics

5.3 Individual service status

5.4 Check all bound ports

5.5 Preflight

Quick moctl reference

Common issues

Values for the `/initialize` wizard

Values for the `/initialize` wizard

Values for the `/initialize` wizard

Values for the `/initialize` wizard

Values for the `/initialize` wizard

4.7 Open `/initialize` in a browser

Quick `moctl` reference